Author Archives: admin

Modified wooden flooring Dimensional stability: After treatment, the wood’s biological durability increases, its moisture absorption decreases, and its liquid contact angle increases. Therefore, the wood is less prone to warping, shrinkage, insect infestation, and cracking. Microbiological inhibition capabilities: Wood improves in strength, the lime-smelting reaction alkalizes the wood, and the bitterness of the base increases its ability […]

Cement-aggregate bricks, also known by other names such as aggregate bricks, block bricks, concrete bricks, etc., are a type of unburnt brick made from a hardened concrete mixture consisting of cement, aggregates (sand, crushed stone, thermal power plant fly ash, blast furnace slag), additives, water, etc., using vibration or pressing methods, or a combination of […]

1. BLOCK AAC AUTOCLAVED AERIAL CONCRETE BRICKS (3.5)  TECHNICAL SPECIFICATIONS Size: 600 x 200 x 200 mm 600 x 200 x 150 mm 600 x 200 x 100 mm 600 x 200 x 85 mm 600 x 200 x 75 mm Compressive strength: 3.5 MPa Equivalent compressive strength: B3 Fire resistance (hours): > 3 Density: […]

1. ALC panel without reinforcing steelUltra-lightweight:   Size: 1200mm x 600 x Thick (Customized) 2. ALC AUTOCLAVED AERATED LIGHTWEIGHT CONCRETE SLABS WITH 1 LAYER OF STEEL (~ 3.5MPA) Description: It is a steel mesh reinforced T-joint panel, is manufactured from autoclaved aerated concrete (AAC) non-fired material, thus possessing all the superior technical properties of AAC blocks. […]

We can supply types of lightweight bricks as follwings: 1. AAC AUTOCLAVED AERIAL CONCRETE BRICKS 2. TYPES OF  ALC Wall Panel 3. Cement Aggregate Bricks The main materials used to create this type of material are sand, stone, cement, finely crushed stone, lime, gypsum, and aluminum compounds, processed using autoclaved aerated concrete (AAC) technology. These […]